Wadia Digital CD Player 581SE User Manual

Information & Operation Manual

581se/781i CD Player

Information & Operation Manual

Table of Contents

Preliminaries

Wadia Digital – A Brief History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation and Set-up

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installing the Tip-Toes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Connecting to Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Connecting to AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Connecting Directly to a Power Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Using with a Preamplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Optimizing the Output Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Connecting Digital Sources (Wadia 581ise/781i only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Choosing a Digital Cable (Wadia 581ise/781i only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

General Operation

Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Display Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Display Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Remote Control Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Playback Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Theory of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Menu Screen Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Digital Algorithms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Appendices

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Software License Agreement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Environmental Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Thank You

All of us at Wadia would like to offer thanks and congratulations to you for purchasing the Wadia 581se/781i

CD Player. We sincerely believe that your Wadia 581se/781i CD Player will bring you many years of musical

pleasure and satisfaction.

While every new owner is anxious to begin listening, we encourage you to take a few minutes to read this manual

and familiarize yourself with the full capabilities of the Wadia 581se/781i CD Player.

If you are in a hurry to begin listening, please read the sections of this manual where the symbol at

right is shown.

Wadia Digital – A Brief History

Wadia Digital, founded in 1988, is one of the original companies dedicated to high performance digital audio

reproduction. Wadia was formed by a team of engineers from the Minneapolis based 3M Corporation (Minnesota

Mining and Manufacturing) who shared many years of experience in advanced digital telecommunications

research and development. In the early 1980’s, these engineers became intrigued by the emerging compact disc

technology. Disappointed with the sound quality of early CD players, they examined the workings and designs of

these early components and found them to be unsophisticated when compared with the technology available in

other areas of digital design. In response, they founded Wadia Digital – a company based on the philosophy of

applying advanced technology to improve the performance of digital audio components. Wadia’s first product, the

Wadia 2000 Decoding Computer, was an absolute breakthrough in digital audio. For many discerning listeners, it

proved that Digital Audio was a musically responsive, evolving, and engaging format.

Building on a tradition of excellence, Wadia continues to develop innovative technology; refining, listening,

engineering, and improving along the way. Since the Wadia 2000, new generations of industry-leading designs

have been introduced and embraced by listeners around the world. Each step of the way, Wadia has consistently

raised the standard for performance of Digital Audio playback.

Here is a brief list of the technological innovations the Wadia engineers have pioneered over the past 20 years:

• DigiMaster™ patented algorithm (filter optimized for reproducing music)

• ClockLink™ proprietary jitter reduction technology

• SwiftCurrent™ current to voltage conversion technology

• First outboard Digital-to-Analog converter

• First to apply glass fiber-optics to home audio

• First to recognize jitter as a source of audible distortion

• First to perfect digital volume control

• First high-end CD player competitive with expensive separates

• First company to provide bit perfect digital audio output from the iPod

Although Wadia’s digital expertise and track record exceed those of any audio company, technology alone does

not guarantee musical performance. Wadia designs are born of a delicate balance of technology shaped by a

passion for music.

Wadia is proud to introduce the Wadia 581se/781i CD Player, a breakthrough in sonic performance and value,

and a strong statement of our years of dedication to music.

581se/781i CD Player

Installation and Set-up

Unpacking

Use care in unpacking your Wadia 581se/781i CD Player. Inspect it for any shipping damage and call your dealer

immediately if any is found.

Do not plug your Wadia 581se/781i CD Player into an AC outlet if you find shipping damage.

We advise saving all packing materials so that the unit can be easily and safely shipped if the need arises.

Accessories

Provided with the Wadia 581se/781i CD Player are the following accessories:

• AC power cord

• Four tip-toes with threaded studs

• Four steel coasters

• RCA/BNC adapter (only included with 581ise and 781i)

• Remote Control

• Two type AAA batteries

Do not tip the unit onto the back panel. This can damage input and/or output connectors.

Installing the Tip-Toes

With the unit still positioned on its side, screw one of the tip-toes into the bottom of each corner post.

Position the Wadia 581se/781i CD Player where you would like it to reside in your system. We recommend

choosing a solid, non-resonant, level surface for best performance. If this surface is susceptible to damage,

place one of the steel coasters under each tip-toe.

Connecting to Your System

CHECK

VOLTAGE

HERE

Check to make sure your Wadia 581se/781i CD Player has been manufactured for operation at your

AC line Voltage. Attempting to use the Player at any voltage other than the specified on the rear of

the unit may damage the unit. Damage caused by improper operation is not covered by warranty. If

the voltage specified is different from your AC voltage, contact your Wadia dealer.

Connecting to AC Power

The best performance is obtained when the Wadia 581se/781i CD Player is plugged directly into the wall with

the power cord provided. The Wadia has power conditioning, surge suppression and an extremely sophisticated

overall protection scheme. It should not be necessary to use surge protectors power conditioners or aftermarket

power cords, some of which may degrade the sonic performance. If you wish to experiment with any of these

devices, work closely with your local dealer – and most of all, trust your own ears.

Connecting Directly to a Power Amplifier

Avoid allowing static shocks to be applied to the inputs or outputs. To prevent static shocks, touch any grounded

surface, such as the Wadia 581se/781i CD Player chassis, before connecting or removing a cable. It is unlikely

that a static shock will damage the unit, but it may cause the Wadia 581se/781i CD Player circuitry to “lock-up”

(see Lock-Up under Trouble Shooting).

Inputs and outputs can be safely connected to the Wadia 581se/781i CD Player

1 Before the unit is powered up

2 When the unit is in Relay-Mute mode

We strongly recommend that you use your Wadia 581se/781i CD Player connected directly to your power amplifier.

Even if you purchased your Wadia 581se/781i with the intention of connecting it to your preamplifier, we suggest

that you try direct connection to your amplifier. Many listeners are surprised by the improvement in performance

over even the most expensive preamplifiers.

To connect your Wadia 581se/781i CD Player to a power amplifier, ensure that your power amplifier is turned

off then connect your analog interconnects from the Wadia 581se/781i analog outputs to the amplifier’s inputs.

Using with a Preamplifier

While the Wadia 581se/781i CD Player was designed to be used without a preamplifier, no compromises were

made in its design that will prevent excellent operation in a conventional system with a preamplifier.

When using a preamplifier, set the Wadia 581se/781i CD Player volume control to its maximum level.

581se/781i CD Player

Optimizing the Output Level

Best performance is obtained when operating the Wadia Volume Control near the top of its range. If needed, the

maximum output level of your Wadia 581se/781i CD Player can be adjusted to match the overall sensitivity of your

system so that the critical listening will take place with the volume control operating near the top of its range.

The maximum output level of the Wadia 581se/781i CD Player is adjustable by means of a set of internal

switches. The Wadia 581se/781i CD Player is factory set to accommodate the most common range of system

sensitivity. If you find that your typical volume level during critical listening is below 65 on the volume display,

it will be advantageous to use a different setting. To change the output level, consult your dealer.

Connecting to Other Digital Sources (Wadia 581ise/781i only)

The Wadia 581ise/781i CD Player is equipped with digital inputs which can accept digital signals from

any of the established digital formats. (Input 1: Glass-fiber optical, Input 2: Coaxial with BNC connector,

Input 3: Plastic-optical TOSLINK, Input 4: AES/EBU with XLR connector)

The Wadia 581ise/781i CD Player digital inputs will decode any word length up to 24-bit, and any of the standard

digital audio sampling frequencies up to 96kHz.

Choosing a Digital Cable (Wadia 581ise/781i only)

While the Wadia 581ise/781i CD Player supports all currently accepted transmission formats for digital audio,

we recommend using a high quality glass-fiber cable such as the one available from Wadia. Wadia Digital was

the first company to use glass fiber-optic data transmission in digital audio. We have continually improved this

format and believe that it offers the best, most consistent performance of all the available options.

Based on our experience, here is a list of digital interface methods in descending order of performance:

1 Glass optical (as implemented by Wadia)

2 AES/EBU using XLR connector

3 Coaxial cable using BNC connector

4 Coaxial cable using RCA connector

5 TOSLINK plastic-optical cable

The quality of any of these transmission methods depends on the quality of the cable and the sophistication of

the transmitter and receiver. For example, a high quality coaxial cable can outperform a low quality AES/EBU

cable. A high quality AES/EBU cable will outperform a poorly implemented glass optical system.

If you are using a coaxial cable we recommend that you have the cable terminated with a BNC connector. This

will provide higher performance than an RCA connector. Your Wadia 581ise/781i comes with an RCA/BNC

adapter that can be used for experimentation between different types of coaxial cable.

Again, we highly recommend that you take advantage of your dealer’s experience and, most importantly,

trust your ears.

All XLR-type inputs and outputs on the Wadia 581se/581ise/781i CD Player, both digital and analog, use the

standard audio pin configuration:

Pin 1 - Ground

Pin 2 - Positive signal

Pin 3 - Negative signal

Frequently Asked Questions

Should I use a Balanced or Unbalanced connection?

If your amplifier has a true balanced input, we recommend you use the balanced analog output from your Wadia

581se/781i CD Player. All things being equal, properly implemented balanced (also called differential) circuitry

sounds better than unbalanced circuitry. The Wadia 581se/781i CD Player is a true balanced design. It generates

the inverted signal in the digital domain and all subsequent processing is done in balanced mode. Your Wadia

581se/781i CD Player is designed to maintain many of the advantages of true balanced design when using the

unbalanced outputs. In addition, the Wadia 581se/781i CD Player output stage is capable of driving both types

of outputs simultaneously.

Why should I bypass the Preamplifier?

A preamplifier is unnecessary when using your Wadia 581se/781i CD Player. The Wadia 581se/781i CD Player

provides all the necessary control functions of a preamp while the signal is still in the digital domain. This

avoids the sonic degradation caused by analog circuitry, switches, and wire. The Wadia 581se/781i CD Player

output stage can drive any power amplifier and any interconnects, even at very long lengths.

Does the Wadia Volume Control compromise resolution?

The Wadia 581se/781i CD Player uses the latest generation of Wadia’s proprietary digital volume control. The

volume level can be varied in the digital domain by means of mathematical manipulation of the signal, eliminating

the distortion and noise that are inevitable with even the best analog volume controls. While conventional

thinking indicates that reducing the volume digitally can sacrifice low level resolution, Wadia has created an

innovative solution. Wadia’s patented digital filtering algorithm produces a 24 bit output rather than the 16 bits

stored on the CD. This high-resolution signal is then used in the computations which in turn reduce the volume

level. This new signal is fed directly to the DAC chips. Through this innovative method, the Wadia 581se/781i

CD Player maintains high resolution even at the lowest volume control settings.

Can I bypass the Wadia Volume Control?

Because the Digital Volume control does not include any analog circuitry, there is none to be bypassed. Even the

mathematical program step that performs the Digital Volume Control calculation is an integral part of the Wadia

DigiMaster filter algorithm and therefore cannot be bypassed. If you do not need the Wadia Volume Control, set

it to its maximum level of 100 on the display.

What about Analog Sources?

In order to fully realize the potential of this type of system, Wadia has a range of Analog-to-Digital converters.

Now it is possible to use analog sources, such as a tuner, tape deck, or even a turntable (in conjunction with a

suitable phono stage) in your system without using a conventional analog preamplifier. Consult your dealer for

more information on the Wadia Analog-to-Digital products.

Should I leave the Wadia 581se/781i CD Player with the power on?

The Wadia 581se/781i CD Player is designed to be left with the power on with no harm or wear to the unit.

All motors and laser circuitry turn off when the unit stops playing. If desired, the front display can be turned off

(see Turning off the Display under Remote Operation). Leaving the power on allows the circuitry to remain in

thermally stable, which provides better performance and longer life. Careful listeners will notice that the sound of

the Wadia 581se/781i CD Player will improve steadily after the unit is powered up. A new unit will undergo more

dramatic changes when power is applied for the first time. If you turn off your Wadia 581se/781i for more than

an hour, you will find that the unit will undergo similar, but less dramatic improvement once power is reapplied.

581se/781i CD Player

General Operation

Using the switch located directly above the AC power input, turn the switch to the ON position.

Front Panel Controls

The front panel of the Wadia 581se/781i CD Player features basic controls that allow you to operate basic

functions without using the Remote Control.

Volume Up

Increase the volume by 1/2 dB.

Play/Next Tract

This button will cause the unit

to advance to the next track

and begin playing.

Previous Track

This button will cause the unit

to move to the previous track

and begin playing.

Open/Close/Stop

If the drawer is open, pushing this

button will CLOSE the drawer.

Volume Down

Decreases the volume by 1/2 dB.

If the CD is playing, pushing this

button will STOP playing.

If the unit is not playing, pushing

this button will OPEN the drawer.

Example:

To open the drawer while the unit

is playing, push the button once to

stop and once more to open.

Display Features

Track

Time

Playback Options

Format

Volume

Transport Functions

Display Functions

The Wadia 581se/781i CD Player features a large display screen. The top section shows the status of the transport.

The bottom of the display indicates preamp functions, as described below.

Turn-On Screen

This screen is displayed each time the Wadia 581se/781i CD Player is powered-up. After five seconds, the display

will change to the Input screen with internal transport selected, then change again to the Volume screen with

the volume set to Zero. (The screen on the 781i will read “781i CD Player”)

Input Screen

The Input screen shows which input is currently selected. It also indicates whether ClockLink is engaged and the

sampling frequency. If there is no signal connected to the selected input, the display will read, “No Data.”

581se/781i CD Player

Status Screen

The Status screen indicates whether the status is Phase Normal or Inverted, and whether the CD was recorded

using digital high frequency emphasis.

Volume Screen

The Volume screen shows the right and left channel volume level. If the output is muted, the display will indicate

this by showing, “MUTE.”

During normal listening, the display will show the default screen

Changing Between Display Screens

Anytime a button is pressed, the Wadia 581se/781i CD Player display automatically switches to the

appropriate screen to display the change. For example, pressing the balance controls on the remote control

will switch the 581se/781i CD Player display to the Balance screen. After five seconds, the display will return

to the Volume screen.

Also, pressing the enter button will cause the display to change to the next screen. Repeatedly pressing the

enter button will cause the display to continue to change to successive screens, as shown in the Menu Screen

Map on page 15.

Remote Control Operation

The Wadia 581se/781i CD Player remote control requires two type-AAA batteries, which you will find in the

accessories kit. To install the batteries, remove the battery cover on the back of the remote by sliding it towards

the bottom of the remote. Insert the batteries as indicated on the battery holders.

Program* / Transport Time Mode

Repeat / Single Track Repeat

Display On/Off

Balance Left/Right

Direct

Enter

Mode

Input

+ 10** / Phase Invert

Drawer Open/Close / Search Back

Search Forward / Mute

Pause / Play

Volume Up/Down

Stop / Track Back / Track Forward

* Not Active

** Use before selecting any track

greater than nine (see page 12)

Adjusting the Volume

Whenever the volume control buttons are pressed, the volume for both channels will be increased or decreased

by an increment of 1 on the display screen. The range of the volume control is from 1 to 100, with each step

representing 0.5 dB change in volume.

Adjusting the Balance

Relative volume of each channel can be adjusted via the balance control buttons on the remote. Pressing one

of the balance buttons increases the volume on that channel relative to the other by an increment of 0.2 on the

display. This corresponds to a 0.1dB change. The next time the button is pressed the opposite channel is decreased.

This way the overall volume level (the sum of the two channels) remains constant within 0.1dB.

581se/781i CD Player

Selecting an Input

The Wadia 581ise/781i CD Player has four digital inputs, plus the internal drive. Any of the inputs can be selected

from the remote control by pressing the input button. Each time the input button is pressed, the next input is

selected. For example, if you are listening to internal drive and you press the input select, Input 1 will be selected, press it

again, and Input 2 will be selected and so on. After Input 4, the list will begin again with the internal drive.

Whenever you select a new input, the display will switch to the Input Screen.

Format Selection

The Wadia 581se/781i CD Player has CD and SACD playback capabilities. You can toggle between the CD and

SACD layer on a hybrid disc by first pressing the Stop button and then the Mode button.

Inverting Absolute Phase

The Wadia 581se/781i CD Player has the ability to invert absolute phase in the digital domain. Pressing the

Phase Invert button

on the remote control will cause the Wadia 581se/781i CD Player to invert phase;

pressing it again will switch the phase back to normal. If the Wadia 581se/781i CD Player is in Phase Invert

mode, this will be indicated on the Input Screen of the display.

Turning Display On/Off

By pressing the Display On or Off button, the Wadia 581se/781i CD Player display can be turned off completely.

Mute Modes

The Wadia 581se/781i CD Player has two mute modes that are automatically implemented under different

circumstances.

DSP-Software Mute

When the Mute button is pressed on the remote control, the Wadia 581se/781i CD Player’s DSP engine

transmits a stream of zero signal level samples to the DAC section, which results in zero output.

Output-Relay Mute

The Wadia 581se/781i CD Player has mute relay connected between the positive and negative outputs.

When this relay is engaged, it connects the positive output to the negative output, reducing the output to

zero. This relay, which produces an audible click when it engages or disengages, is not in the music signal

path. The mute relay is engaged:

• When the Wadia 581se/781i CD Player detects AC input level below its minimum operating range.

• Each time the Wadia 581se/781i CD Player power switch is turned on.

• When the volume control is set to zero AND the mute button on the remote control is pressed. When

the Wadia 581se/781i CD Player is in either Mute Mode, the Volume Screen will indicate this by displaying

the word, “MUTE.”

+10: Use before selecting any track greater than 9. For example; to select track 23 you should first press the +10

button and then press the 2 button and then the 3 button.

TRACK BACK/FORWARD

SEARCH BACK/FORWARD

: Pressing these buttons allows access to the previous or next track on a CD.

: Pressing these buttons allows fast reverse or fast forward access through

a track. Pressing the PLAY button to resumes normal playback.

STOP : Pressing this button while a CD is playing stops PLAY.

PAUSE : Pressing this button, while a CD is playing, suspends PLAY. Pressing the PLAY button will resume

play at the point where the pause button was pressed.

PLAY : After a CD has been loaded, pressing this button plays the CD beginning with the first track

Playback Options

TIME : This button switches between the various time modes on the display. Before play, the total time on

the CD is shown. Once a CD starts to play the elapsed time of that track will be shown. Pressing the button on

the remote control once will cause the display to indicate the remaining time in that track (remain). Pressing this

button on the remote control again will cause the display to indicate the total time elapsed for the entire CD.

Pressing the button another time will cause the display to show the total time remaining for the entire CD. Finally,

pressing the button again will cycle back to the original default setting.

REPEAT : Pressing this button will cause the entire CD to repeat continuously. Pressing this button a second

time will take the transport out of the repeat mode.

SINGLE REPEAT : Pressing this button will repeat a single track continuously. Pressing the single repeat

button a second time will take the transport out of single repeat mode.

581se/781i CD Player

Theory of Operation

Using ClockLink with an External Processor

ClockLink eliminates jitter added when the clock signal is recovered from the digital data stream. In a

non-ClockLink system, jitter is added when the clock signal is embedded in the data stream and transmitted

to the DAC. When the clock signal is recovered from the data stream (as shown below), and used to clock

the DAC output, this jitter degrades the sonic performance.

Data and Clock to DAC

Transport

DAC

Jitter Added

Conventional CD Player

With ClockLink, the clock is not recovered from the data. Instead, the master clock is located at the DAC. This

clock signal is transmitted to the transport to keep it synchronized with the DAC. Because the recovered clock is

ignored, any jitter on that signal does not affect the sonic performance.

Data to DAC

Transport

DAC

Clock to Transport

CD Player with ClockLink

The Wadia 581ise/781i CD Player with its digital inputs and outputs can be used with a digital signal processor

such as a digital equalizer. Digital processors allow the signal to be modified without adding analog noise and

distortion. However, digital processors can add jitter, as shown below, causing noticeable sonic degradation.

Data and Clock to DAC

Digital

Processor

Digital

Output

Digital

Input

Jitter Added

Transport

DAC

Conventional CD Player with an External Digital Processor

Using ClockLink with an external processor, the Wadia 581ise/781i CD Player ignores the incoming clock and

uses the master oscillator at the DAC. As a result, jitter added by the external digital processor does not affect

sonic performance..

Data to DAC

Digital

Processor

Digital

Output

Digital

Input

Transport

DAC

Clock to Transport

CD Player with ClockLink with an External Digital Processor

Configuring Digital Inputs for ClockLink (Wadia 581ise/781i Only)

To utilize ClockLink with an external processor, the Wadia 581ise/781i CD Player digital inputs must be configured

for ClockLink as described below.

Use the Enter button to scroll through the display menus until you reach the configuration menu for the input

you wish to configure. Shown below is the configuration menu for Input 1:

Use the Volume Up or Volume Down button to change to ClockLink ON. Press the Mute button to save

the configuration.

Note: Using ClockLink with a source other than the internal transport will result in unpredictable,

degraded performance.

ClockLink should only be used when using an external processor which is being fed by the 581ise/781i CD

Player internal transport. For all other applications, inputs should be configured with ClockLink OFF.

The Wadia 581ise/781i CD Player has several features to prevent ClockLink from being engaged when it should

not be. First, whenever the input signal is other than 44.1 kHz sampling frequency, the Wadia 581ise/781i CD

Player will automatically revert to recovered clock mode. Second, if the internal transport is not running, the

Wadia 581ise/781i CD Player will revert to recovered clock mode.

Note: All inputs on the Wadia 581ise/781i are factory configured for ClockLink OFF.

ClockLink Status Indication

When the Wadia 581ise/781i CD Player is operating in ClockLink mode, the Input screen will indicate as

shown below:

Even if an input is configured for ClockLink, the Status screen will only indicate ClockLink if it is currently

engaged. For example, if an input is configured for ClockLink, and the Wadia 581ise/781i CD Player’s internal

transport is turned off, then the display will not indicate ClockLink.

581se/781i CD Player

Menu Screen Map

Volume Screen

Enter

N+Enter

Balance Screen

Status Screen

Input Screen

Mute

Y+Enter

Digital Algorithms

In the Wadia 581se/781i CD Player there are three user-selectable digital algorithms that can be used to optimize

the sonic performance based on system matching and personal musical priorities.

The three algorithms in the 581se/781i CD Player all upsample to 32x the input rate (at 24 bit/1.4112 MHz DAC

sample rate), but differ in their time and frequency domain characteristics. They are:

Algorithm A Digimaster v2.5. Wadia’s classic time-domain interpolation algorithm delivers a robust sound

with extraordinary image Focus and re-creation of recorded space.

Algorithm B Provides a more extended top end than Algorithm A, with superior time-domain performance

compared to conventional CD filters.

Algorithm C Retains the high frequency extension and superior detail resolution of Algorithm B, but with a